Report
Global Dental Laboratory Workstations Market Survey and Trend Research 2018

Summary
This report describes the development of the industry by upstream & downstream, industry overall and development, key companies, as well as type segment & market application and so on, and makes a scientific prediction for the development industry prospects on the basis of analysis, finally, analyzes opportunities for ...

Global Automotive Transfer Case Market Survey and Trend Research 2018

Summary
Automotive Transfer Case is a part of the drivetrain of four-wheel-drive, all-wheel-drive, and other multiple powered axle vehicles. It is an aluminum or steel housing under the vehicle and the vast majority of transfer cases are either chain based or gear based. The transfer case transfers power from the transmission to the fro...

Global Additive Manufacturing with Metal Powders Market Survey and Trend Research 2018

Summary
Additive Manufacturing with Metal Powders can produce metallic products through three – dimensional and printing technology. Now it is widely used in automotive industry, aerospace industry and medical industry.3D printing of metals works by laying down metal powder. A high powered laser then melts that powder in certain p...

Global Raman Spectroscopy Market Survey and Trend Research 2018

Summary
Raman spectroscopy is a spectroscopic technique used to observe vibrational, rotational, and other low-frequency modes in a system. It relies on inelastic scattering, or Raman scattering, of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range. The laser light interacts with molecula...

Global Home Textile Market Survey and Trend Research 2018

Summary
Home Textile is a flexible woven material consisting of a network of natural or artificial fibers often referred to as thread or yarn. Yarn is produced by spinning raw fibers of wool, flax, cotton, or other material to produce long strands. ?Textiles are formed by weaving, knitting, crocheting, knotting, or pressing fibers toget...

Global Gas-to-liquid (GTL) Market Survey and Trend Research 2018

Summary
Gas to liquids (GTL) is a refinery process to convert natural gas or other gaseous hydrocarbons into longer-chain hydrocarbons such as gasoline or diesel fuel. Methane-rich gases are converted into liquid synthetic fuels either via direct conversion using the new GasTechno? non-catalytic gas-to-liquids process that converts meth...

Global Gas Barbecues Market Survey and Trend Research 2018

Summary
Gas barbecues is a kind of barbecues that use gas to heat. It can help you to create delicious gourmet food outdoors, delivering the authentic barbecue taste with complete convenience.
This report describes the development of the industry by upstream & downstream, industry overall and development, key companies, as we...

Global Embedded Market Survey and Trend Research 2018

Summary
An embedded system is a combination of software and hardware which together facilitate the accurate functioning of a target device. The significant characteristics of an embedded system are speed, power, size, accuracy, reliability and adaptability. Embedded systems can be defined as application-specific, special purpose systems...

Global Electrolyte Analyzers Market Survey and Trend Research 2018

Summary
Electrolyte analyzers measure electrolyte levels in the human body to detect metabolic imbalances and measure renal and cardiac function. The electrolytes measured include sodium (Na+), potassium (K+), chloride (Cl-) and bicarbonate (HCO3- or CO2). Electrolyte analyzers are used in hospital and reference laboratories, and also p...

Global Dry Mortar Market Survey and Trend Research 2018

Summary
Dry mortar is dry powder or granular material made by mixing dried screening process of fine aggregate, cementitious materials, additives, fillers, etc. Most of the dry mortar products contain both mineral cementitious binder (e.g. OPC) and polymer binder (e.g. re-dispersible powder) and they are normally packed in bags after mi...